Head Correction

Linearised correction for variable head in the SDDP subproblem, based on Kompendium 2 §5.4.6.

Problem

The standard SDDP LP uses PQ curves at a fixed reference head. In reality, the net head changes with reservoir level:

  • Higher reservoir → higher head → more power per m³ of discharge
  • Lower downstream reservoir → higher head → more power

For Dokka, M802 (Dokkfløyvatnet) has elevation range 670–735m while TORPA's reference head is 465m. The actual head varies from ~405m (empty) to ~470m (full) — a 14% range that affects the optimal storage policy.

Linearised Correction

The correction adds a premium/penalty term c_k × v_k to the LP objective for each reservoir k, where:

c_k = price × dt × Σ_plants [ P(u) / (A_k × H_net) ]
  • P(u) = current production [MW] at mean discharge
  • A_k = ∂V/∂h = reservoir surface area [Mm³/m] from HV curve slope
  • H_net = upstream elevation − downstream elevation [m]
  • dt = hours per time step

A positive c_k means storing more water increases head and therefore production efficiency. The LP is directly incentivised to maintain higher reservoir levels.

For a downstream reservoir, the sign flips: higher downstream level reduces head and power.

Two-Pass Approach

The correction coefficients depend on the operating point (mean volumes and discharges), which is only known after running the SDDP. The implementation uses two passes:

  1. Pass 1: Run SDDP without head correction → extract mean volumes and discharges from the simulation.
  2. Pass 2: Compute correction coefficients from pass-1 results. Rebuild LP with corrections added to volume variable objectives. Re-run SDDP (warm-started from pass-1 cuts).

This approximately doubles the runtime, which the compendium acknowledges.

Usage

julia --project=HydroRunner HydroRunner/bin/run_case.jl cases/dokka --head-correction
result = run_case("cases/dokka"; head_correction=true)

API

# Compute corrections from mean operating point
corrections = compute_head_corrections(
    cascade, mean_volumes, mean_discharges, mean_price;
    resolution=WEEKLY)

# corrections[k] = NOK/Mm³ to add to v_k in LP objective